Concora Sample Cutter
Concora Sample Cutter is designed to produce a dimensionally accurate
sample in length and width, and most importantly, squareness of
all edges. The Concora Sample Cutter is guaranteed to cut samples
parallel within ±.0005".
.5" x 6.0" Concora Sample Cutter is designed for use
with the Concora Liner Tester and the Concora Medium Fluter, where
a high degree of accuracy is imperative. The Concora Sample Cutter
is also available in 1.0" x 3.0", 1.0" x 6.0",
.250" x 6.0" and 15mm x 150mm models for use with other
laboratory testing instruments. Special Sample Cutters can be
manufactured to your specifications.
The instrument will accommodate a full square foot sample of board
so that further cutting of a normal sample is not necessary. Long
strips of board may also be passed through the Cutter. MD and
OD samples are easily aligned. The Concora Sample Cutter is constructed
with a stripper plate with the full width length of the Cutter
and is spring loaded to prevent slippage when the sample is being
Concora Sample Cutter is constructed with a Plexiglas front, allowing
the operator to observe the placing and cutting of the sample.
Place the sample, either MD or OD, through the slot provided on the Plexiglas front, underneath the punch of the die, and depress the handle. The sample falls to the mahogany base and can be removed through the lower slot.